Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sylmar, CA
Gate installation in Sylmar has to account for what the foothills throw at a property: Santa Ana winds that drive dust and debris into every track and hinge, summer heat that bakes wood until it splits, and the older housing stock where original gates are now decades past their useful life. We’re Gate Repair Arleta, a gate-specialist team that works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems across Sylmar and the surrounding Valley. Whether a gate needs full replacement or the operator has stopped responding, we diagnose it correctly the first time. Call (855) 473-3106 for a free estimate.
Why Sylmar Homes Are Different
Sylmar sits where the San Fernando Valley meets the foothills, and that position shapes every gate we work on. The Santa Ana winds channel through the passes and hit the older tracts near Foothill Boulevard and Hubbard Street especially hard, carrying dry grit that works its way into rollers, hinges, and operator housings. Metal gates we see in Sylmar frequently show expansion marks from summer heat, where panels that fit cleanly in spring bind against posts by August. Wood gates in the mid-century ranch homes, many of them original to houses built 40 to 50 years ago, dry out without consistent sealing, and we routinely find hinge screws that simply will not hold in sun-baked lumber anymore.
The housing stock matters here. The mix of older ranch-style properties and newer tract developments means we encounter everything from wrought-iron driveway gates with failing post anchors to modern automatic systems where the control board has been cooked inside a metal housing with no ventilation. The new developments tend to have lighter aluminum gates paired with residential operators that see heavy daily use, while the older properties often have heavier steel or iron gates that need reinforcement after a wind event. After a strong Santa Ana, the calls we get in Sylmar are almost always the same: a gate blown off its track, hinges ripped from dry posts, or an operator that burned itself out fighting the wind resistance. We plan for those conditions on every installation and repair here.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Sylmar Services
Most Sylmar calls we take fall into two categories: a gate that will not open or close properly, and an electric operator that has stopped responding entirely. Here is what each involves locally.
Gate Repair in Sylmar
Years of sun and wind do specific damage in Sylmar: wood shrinks and cracks, steel fasteners loosen in dry posts, and slide gates pick up enough debris to jam. We repair hinges, posts, frames, tracks, and latches on the actual equipment in place, and we work on your brand, whether it is a Viking slide gate, a Linear swing operator, or a classic wrought-iron driveway gate. We also know what the foothill wind does to a gate that was not reinforced when it was first installed, which is why our repair work here often includes adding bracing so the next Santa Ana does not undo the fix. For a full rundown on repair specifics and pricing, see our Gate Repair in Sylmar page.

Electric Gate Repair in Sylmar
Electric gate repair is a core competency for us, and in Sylmar the heat and dust combine to punish electrical components faster than most homeowners expect. Overheated motors, dead control boards, failing safety sensors, and wiring that has dried and cracked inside conduit are the most common issues we diagnose here. We treat the motor, board, wiring, and operator as one integrated system rather than swapping parts at random, which means we find the actual failure the first time. From Mighty Mule and Ghost Controls on residential properties to DoorKing and FAAC on commercial gates, your system gets diagnosed correctly. Details are on our Electric Gate Repair in Sylmar page.

Gate Installation in Sylmar
New gate installation in Sylmar has to be built for the local conditions from day one: a properly set post, the right material for the sun exposure, and an operator sized to handle wind that a coastal property never sees. We install the complete system, including the gate itself, the operator, the wiring, and the safety edges, so you get one accountable team for the whole job rather than pieces from different vendors. Our crew works across residential and commercial brands like DoorKing, Elite, and Mighty Mule, so whatever fits your property, we can put it in correctly. More on our full installation scope is on the Gate Installation page.
Automatic Gate Installation
Signs you need it
You are still getting out of the car in the heat or rain to open a manual gate, or a new property purchase came with a gate that was never automated.
What it costs in Sylmar
A full automatic gate installation in Sylmar typically runs from $2,850 to $7,900 depending on gate size, operator choice, and the amount of concrete and wiring work required.
How we do it
We measure the gate opening, set or reinforce the posts, mount the operator and hardware, run power from the nearest circuit, install safety sensors and edges, and program the remotes and keypad with you on site.
Electric Gate Installation
Signs you need it
You have a gate frame that is still solid but want it motorized, or you are building new and want the gate and automation handled as one installation.
What it costs in Sylmar
Adding an electric gate system in Sylmar, including operator, wiring, and controls, typically falls between $2,850 and $7,900 based on the operator grade and how far the power run goes.
How we do it
We select an operator matched to the gate’s weight and daily use, install the motor and control board, run and protect the wiring, mount the photo eyes and safety edges, and walk you through the remote and keypad setup.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has sagged past adjustment, the posts are loose in dry soil, or you want a wider opening for larger vehicles.
What it costs in Sylmar
A new driveway gate in Sylmar with installation typically costs between $2,850 and $7,900, with larger spans, heavier materials, and automation pushing toward the higher end.
How we do it
We remove the old gate and hardware, set posts to proper footing depth, hang and align the new gate, install the operator if desired, and test the full opening and closing cycle under load before leaving.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street, or there is not enough room for a swing gate to arc across the entry without hitting a wall or car.
What it costs in Sylmar
Sliding gate installation in Sylmar typically runs from $3,200 to $7,900 depending on track length, gate weight, and whether the motor is mounted above or below the track.
How we do it
We set the track and guide rollers, build a level base, hang the gate panel, mount the operator, run the safety sensors and edges, and adjust the travel limits so the gate stops cleanly in both directions.
What Gate Installation Costs in Sylmar
| Item | Typical range in Sylmar |
|---|---|
| Automatic gate installation | $2,850 – $7,900 |
| Electric gate opener installation | $1,500 – $3,800 |
| Driveway gate with operator | $3,200 – $7,900 |
Several things push the price up in Sylmar. The first is gate size and weight: a heavy iron driveway gate needs a stronger post setting and may need a higher-grade operator than a light aluminum pedestrian gate. The second is the power run: if your gate is far from the electrical panel, the wiring work and conduit take longer and add cost. The written estimate sets the final price, and we quote it before any work starts.
Do you handle the power run and the safety edges?
Yes. We run the power from your panel to the operator, install the required safety edges and photo eyes, and test the system’s reversing function before we call the job done.
How long does a full gate installation take in Sylmar?
Most residential gate installations take one full day from post setting through final programming. Larger driveway gates, heavier materials, or difficult power runs can push into a second day, and we confirm the schedule in your written estimate.
Brands We Service in Sylmar
We are brand-agnostic by training, not by accident. Across Sylmar jobs we routinely service Ghost Controls and Mighty Mule openers on residential gates, DoorKing and Elite on small commercial and multi-family properties, and we carry common boards, remotes, and safety parts so we are not starting from zero on every call. If your operator is still under warranty or you have a brand question, see our brands page for specifics.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sylmar, CA
| Service | Typical range in Sylmar |
|---|---|
| Gate repair (hinges, track, latch) | $150 – $500 |
| Electric gate repair (operator, board, wiring) | $200 – $1,200 |
| Gate opener motor replacement | $500 – $2,000 |
| Gate installation (new full system) | $2,850 – $7,900 |
| Electric gate opener installation | $1,500 – $3,800 |
| Automatic gate installation | $2,850 – $7,900 |
| Driveway gate installation | $2,850 – $7,900 |
| Sliding gate installation | $3,200 – $7,900 |
| Safety sensor replacement | $150 – $350 |
What moves the number in Sylmar is usually the gate’s condition rather than the brand: a 45-year-old iron gate with rotted post cores and a seized hinge costs more to make right than a newer aluminum gate that just needs a track adjustment. Dust is another factor, since operators that have been running with grit in the gear train often need more than a quick part swap. You get a written price before any work begins, so there is no surprise on the invoice. Call (855) 473-3106 and we will give you an exact number.
Neighborhoods We Serve in Sylmar
We cover the full Sylmar area, from the older ranch-home tracts near Foothill Boulevard up to the newer developments and commercial properties along San Fernando Road. Response time for most Sylmar repair calls is fast dispatch from 7am to 7pm, Sunday through Friday.
- Sylmar Hills
- Lake View Terrace
- Kagel Canyon
- Rancho Cascades
- Hansen Hills
Service Area – Cities Near Sylmar
Sylmar is one of the cities we serve from our base in nearby Arleta, and we regularly take calls from the surrounding Valley communities. We cover Pacoima, CA, Mission Hills, CA, Arleta, CA, and Granada Hills South, CA. If you are just outside Sylmar, call and we will confirm coverage for your street.
Serving Sylmar, CA – Our Local Coverage Area
We serve Sylmar and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sylmar
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. For a gate stuck open or an operator that has failed, we can usually have a technician to your Sylmar property the same day. A call outside dispatch hours is booked into the next opening.
Most cities require a permit when a new gate or operator is installed, especially if it involves electrical work or sits at a driveway entry. We recommend checking with the Sylmar planning or building department before installation, and we can advise you on what to ask when you call.
Yes. We work on gates and openers regardless of who installed them originally, and we service equipment from nine recognized brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Your system gets diagnosed the first time.
For a free estimate on gate installation, repair, or electric gate work in Sylmar, call (855) 473-3106. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Sylmar Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Hector Herrera"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Stephanie Gallagher"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Xavier Freeman