Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sun Valley
When a gate stops working in Sun Valley, the problem is rarely simple. This is a place where a sliding chain-link gate at an equipment yard and a swing gate at a 1950s stucco house can fail for completely different reasons, sometimes on the same block. Our team at Gate Repair Arleta knows that split well. We repair electric and automatic gates across Sun Valley, from the industrial stretch along San Fernando Road to the tract homes off Glenoaks Boulevard. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 473-3106 and tell us what your gate is doing. You’ll get a straight answer, not a guessing game.
Why Sun Valley Homeowners Call Gate Repair Arleta for Gate Repair
Most gate companies in the Valley treat every job the same way: gate is broken, replace the operator, leave. That approach fails in Sun Valley because the failure modes here are specific. The dust from salvage yards and auto-body shops works its way into track rollers within months. The clay soil under the older block walls shifts, and the post that held your gate plumb last year is now leaning a half inch out. We look at the whole system the way it actually behaves on your property, not the way a diagram says it should behave.
“Your system, diagnosed correctly the first time” is not a slogan for us. It is how we keep from charging Sun Valley customers twice for the same repair. We work on your brand, and that matters when you have a Mighty Mule on a residential driveway or a DoorKing on a commercial entrance. Our gate repair team does not need to study the manual. They have seen the fault codes before.
Because we are a gate-only shop, not a multi-trade contractor, the person who answers the phone knows the difference between a Ghost Controls swing arm and an Elite slide operator. That matters when a gate will not close and your property is open to the street. Call (855) 473-3106. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Sun Valley
Gate welding in Sun Valley is a regular part of our repair schedule, not an occasional add-on. The combination of heavy commercial gates and aging residential frames means we see cracked welds, broken hinge tabs, and sagging steel frames every week. When a gate has actual structural damage, tightening bolts and adjusting the operator will not fix it. The metal has to be cut back, re-fitted, and welded.
What We Weld
We repair cracked gate frames, re-weld hinge plates that have torn away from the post, and rebuild the bottom rails on chain-link commercial gates. On residential swing gates, the most common weld repair is a hinge post that has cracked at the weld line where it meets the frame. The gate still opens, but it flexes under its own weight and eventually binds.
What It Costs
Typical gate welding in Sun Valley runs $180 – $450 for a residential frame repair. A commercial cantilever or sliding gate with structural cracks typically runs $350 – $850 depending on how much of the rail needs replacement and whether we have to remove the gate from the track to weld it safely. The written estimate sets the exact price before any work starts. Call (855) 473-3106 and we will come look at it, no charge for the estimate.
Commercial Gate Repair in Sun Valley
Commercial gate repair in Sun Valley is the core of what we do, because this city has more industrial gate traffic than almost anywhere else in the San Fernando Valley. The yards along the 5 and 170 corridors run sliding chain-link and cantilever gates through constant truck cycles, often a hundred or more openings a day. Those gates do not fail gently. They tear racks, snap rollers, and burn out operators.
Heavy-Duty Gates and Operators
We work on LiftMaster, FAAC, BFT, and DoorKing commercial operators, along with the steel work that carries them. When a cantilever gate jumps its track, the problem is usually a combination of dust-packed rollers and a sagging support post that has shifted in the clay soil. We reset the post footing, replace the rollers, and adjust the rack so the gate moves without binding. Then we set the operator limits so it stops fighting the gate.
Business Gate Pricing
Commercial gate repair in Sun Valley typically runs $350 – $900 for rail, roller, and rack work. A full operator replacement on a heavy slide gate runs $1,200 – $2,500 installed, depending on the brand and the controls already on site. We quote the job after we look at the gate, and the price is agreed before we touch a tool. The estimate is free. Call (855) 473-3106.
Trusted Brands We Service in Sun Valley
We service Ghost Controls, DoorKing, Elite, and Mighty Mule across Sun Valley, along with LiftMaster, Linear, FAAC, BFT, and Viking. Nine brands, one specialist team. For Sun Valley customers that means we can usually identify what is wrong with your operator from the symptoms you describe, before we even arrive. We keep common parts for these systems in our service vehicles, because driving back across the Valley for a control board wastes your time and ours. Electric gate repair is our core competency, and we treat the motor, control board, wiring, and operator as one integrated system instead of swapping parts until something works. Call (855) 473-3106 for a free estimate.
Common Gate Repair Problems We See in Sun Valley Homes
- Dust-packed slide tracks and rollers. Sun Valley’s industrial yards throw a lot of fine grit into the air, and it lands in the track of your sliding gate. The gate starts to bind, the operator strains, and eventually the overload trip shuts the whole thing down.
- Sagging swing gates on aging walls. The 1940s – 1960s stucco homes in Sun Valley often have block or wood walls that have shifted over the years, and the hinge post has shifted with it. The gate drags at the latch side, even with the hinges tightened.
- Photocell misalignment from heat and wind. Summer heat above 100°F and Santa Ana winds warp metal frames and knock safety photo eyes out of line. The gate stops halfway and reverses, and the operator flashes an entrapment fault.
- Operators that fault from overwork. A residential operator on a Sun Valley property where a home business runs traffic, or where the driveway is shared, can cycle far more than it was rated for. The board overheats and the gate refuses to move until it cools down.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Sun Valley, CA
Gate repair in Sun Valley typically runs $150 – $850 depending on what failed. A hinge and realignment job on a residential swing gate is usually $150 – $300. A roller and track cleaning on a sliding gate runs $180 – $350. Welding repairs start around $180 and go up to $850 for structural work on commercial gates. Operator diagnostics and limit adjustments are usually $120 – $250, and a full operator replacement runs $600 – $2,500 installed. The written estimate sets the final price, and it is agreed before work starts. Call (855) 473-3106 for an exact quote. The estimate is free, and we will not start until you approve the number.
We Also Serve Cities Near Sun Valley
Our gate repair team works throughout the northeast San Fernando Valley. We regularly serve Lake View Terrace, Arleta, Pacoima, and Panorama City, so if your property sits near the Sun Valley line, we can still get to you quickly. Call (855) 473-3106 and tell us exactly where your gate is.
Serving Sun Valley, CA – Our Local Coverage Area
We serve Sun Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sun Valley
We remove the gate from the track, clean out the packed dust and debris from the rollers and the rail, and inspect the support posts for shifting caused by clay soil. Then we reset any post that has moved out of plumb, replace worn rollers, and re-align the rack so the gate runs straight. If the operator is still fighting the gate after that, we adjust the torque limits and test the cycle count. The fix usually runs $250 – $650. Call (855) 473-3106 and we will come look at it free.
Because the hinge post itself has shifted. On Sun Valley’s clay soil, the block or wood wall that holds the post cracks and leans over time. Tightening hinges will not fix a post that is out of plumb. We reset or reinforce the post footing, then re-hang the gate so the weight sits true. That repair typically runs $180 – $400, and the estimate is free. Call (855) 473-3106.
The most common cause in Sun Valley is a misaligned photo eye, usually from heat warping the bracket or from a bump that knocked the sensor offline. The operator stops because it thinks something is in the way and trips the entrapment protection. The second cause is a track or hinge binding that makes the operator work too hard and hit its force limit. We diagnose both on-site and fix them the same day, typically $120 – $300. Call (855) 473-3106.
Yes, that is a major part of the commercial gate work we do here. We repair and replace cantilever gates that cycle constantly for truck traffic off San Fernando Road, Sheldon Street, and the side streets around the 5 and 170 corridors. We repair the steel, reset the posts, replace rollers and racks, and set the operator so it can handle the demand. Heavy commercial repairs typically run $450 – $900, and a replacement gate with operator runs higher depending on width and controls. The estimate is free. Call (855) 473-3106.
If the gate flexes visibly when it moves, if a hinge tab is torn or cracked, or if the frame is separating at a corner, it needs welding. An adjustment can fix alignment, but it cannot restore structural strength. On Sun Valley gates that have baked in years of 100°F heat and been hit by trucks or kids, metal fatigue is common. We will tell you straight whether the gate can be adjusted or the metal needs to be cut and re-welded. Call (855) 473-3106 for a free on-site look.
Call Gate Repair Arleta for Sun Valley Gate Service
If your gate is sagging, grinding, stalling, or refusing to move at all, we will send a brand-specific technician who knows Sun Valley conditions. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the price is agreed before work starts, and the repair is done right for your exact gate. Call (855) 473-3106 now.
Written by Pete Holt, Owner at Gate Repair Arleta, serving Sun Valley since 2018.