Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pacoima
Gate repair in Pacoima usually comes down to two things: knowing the age of the hardware and knowing the soil under the posts. Most homes here were built between the 1940s and 1960s, and the original wrought-iron pedestrian gates and chain-link driveway gates are still hanging. After 50-plus years of hot, dry summers and Santa Ana winds, hinges loosen, latches fail, and automatic openers strain against gates that no longer sit square. We work on your brand, whether it’s a LiftMaster operator from the 1990s or a BFT board that’s finally given out. Call (855) 473-3106 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Pacoima Homeowners Call Gate Repair Arleta for Gate Repair
Pacoima has a specific kind of housing stock that creates a specific kind of gate repair. These are postwar stucco tract homes with detached garages and alley-access carports, not new subdivisions with freshly poured driveways. That means most of the gates we see here were hung decades ago, before current safety requirements existed, and the problems are age-related rather than installation-related. Pete Holt leads a team that specializes in gates only, not fencing, not garage doors. That focus matters when you’re dealing with an obsolete control board or a hinge post that’s heaved in alluvial soil.
Our gate repair team knows the flatlands near the Pacoima Wash the way a map can’t teach. We know that gates in this specific pocket of the city sag more than they do in Mission Hills or Sylmar, because the ground moves differently here. We’ve re-set enough posts to know when a deeper concrete footing will solve the problem versus when the whole frame is too far gone. Customers in Pacoima call us because we can diagnose that difference over the phone, then show up with the right parts and the right plan.
We price by written estimate, agreed before any work starts. That’s true in Pacoima and everywhere else we work. If a repair doesn’t make financial sense, we’ll tell you that too. Sometimes replacing a rusted-through gate costs the same as cutting and welding patch plates across half its frame.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Pacoima
Driveway Gate Repair in Pacoima typically involves chain-link or wrought-iron swing gates on alley-access carports, many of them original to homes built in the 1940s or 1950s. The fix usually comes down to re-aligning the gate on its posts, replacing worn hinges, and adjusting or rebuilding the latch. On automatic gates, the operator often needs attention at the same time, because a sagging gate forces the motor to work harder than it was designed to. A typical driveway gate repair in Pacoima runs $220 to $540, depending on the size of the gate, the condition of the posts, and whether the opener needs recalibration or board work.
Hinge and Post Reset
When a post heaves or leans, the gate hangs wrong no matter how much you adjust the latch. We pull the post, pour a deeper footing, and install adjustable hinges so the gate can be fine-tuned as the soil shifts. This is the repair that actually fixes the sag instead of masking it.
Opener Strain and Realignment
A gate that drags on the driveway forces the operator to overwork, which shortens the life of the motor and the control board. Realigning the gate and adjusting the opener’s limits and force settings keeps the system from burning itself out. We do this on LiftMaster, Linear, and Viking operators every week in Pacoima.
Gate Welding in Pacoima
Gate Welding in Pacoima is frequently the most economical answer for wrought-iron gates with rusted hinges, cracked frame joints, or broken latch mounts. These gates were built to last, and the metal is often still structurally sound even when the welds and hinges have failed. A typical weld repair on a Pacoima gate runs $140 to $420, depending on how much fabrication is needed and whether the gate must be removed for the repair or can be worked in place.
Hinge Replacement and Latch Repair
Wrought-iron hinge barrels wear out, and when they do, the gate drops and the latch stops lining up with the strike plate. We cut off the old hinge, weld a new one, and realign the gate before re-hanging it. On latch repairs, we often build up the strike area or replace the latch hardware entirely.
Rust Repair and Frame Reinforcement
Rust eats through the bottom rails of wrought-iron gates first, especially on west-facing exposures that take the full afternoon sun followed by cool nights. We cut out the rusted sections, weld in new steel, and grind everything smooth. If the gate is rusted through in multiple places, we’ll tell you honestly whether patching or replacement is the better use of your money.
Trusted Brands We Service in Pacoima
We work on your brand, whatever it is. In Pacoima, we see a lot of LiftMaster and Linear residential operators, along with BFT and Viking on commercial properties. Ghost Controls and FAAC show up regularly on newer installations. Because we maintain nine brands across residential and commercial lines, we stock common control boards, photocells, and remote transmitters locally, so a diagnosis doesn’t turn into a two-week parts wait. That matters when your gate is stuck open and your car is stuck in the alley.
Common Gate Repair Problems We See in Pacoima Homes
- Heaving hinge posts near the Pacoima Wash. The alluvial soil in the flatlands expands and contracts with seasonal moisture changes, pushing posts out of alignment. Gates that were square in May are dragging by November, and the fix is a deeper footing plus adjustable hinges.
- Obsolete control boards on 1990s operators. Older LiftMaster, FAAC, and BFT boards fail after years of heat exposure and power fluctuations. The failure usually shows up as a gate that stops responding to remotes or keypads, sometimes stuck open, sometimes stuck closed.
- Rusted hinges and worn latches on original iron gates. Fifty-year-old wrought iron keeps its looks but loses its hardware. Hinge barrels grind, latches stop reaching the strike plate, and gates that should be securing the property stop doing their job.
- Overworked openers on west-facing gates. Gates that face the late-afternoon sun get direct heat combined with Santa Ana wind loads, which makes the operator fight the gate on two fronts. The motor works harder, the gears strip faster, and the safety edges trigger more often.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Pacoima, CA
A hinge or latch repair on a pedestrian gate in Pacoima typically runs $120 to $280. Driveway gate realignment with hinge replacement lands between $220 and $540. Weld repairs run $140 to $420 depending on the amount of fabrication. Control board replacement adds part cost, which varies by brand and model, and typically lands between $250 and $650 installed. Operator replacement runs $650 to $1,800 with the motor, arm, and safety photocells included. Every job is quoted in writing before work begins, so there is no surprise invoice after the gate is fixed. Call (855) 473-3106 for a free estimate.
What Affects the Price?
- Gate size and weight, which drives how much hardware and labor the job takes.
- Post condition, since a heaved post adds footing work that a simple hinge swap doesn’t need.
- Operator age and brand, because some legacy boards are still available and others require retrofitting to a new controller.
- Access and terrain, especially in alley-access carports where equipment has to be carried in.
We Also Serve Cities Near Pacoima
Our gate repair work in Pacoima puts us minutes from the surrounding communities. We handle the same issues across Arleta, Mission Hills, Panorama City, and Sylmar. Different soil, different housing stock, same brand-specific diagnosis. Call (855) 473-3106. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Pacoima, CA – Our Local Coverage Area
We serve Pacoima and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pacoima
A sagging chain-link driveway gate in Pacoima can usually be fixed, especially if the problem is a heaved hinge post or worn hinge hardware. We pull the post, pour a deeper footing, install adjustable hinges, and realign the gate on its existing frame. Replacement only makes sense when the chain-link fabric itself is torn, the frame is bent beyond straightening, or the gate has rusted through in multiple sections. Call (855) 473-3106 and we’ll tell you which path makes sense after looking at the gate.
Yes, in most cases a 1990s gate opener in Pacoima can be retrofitted with modern safety photocells, safety edges, and updated control boards without replacing the entire operator. UL 325 entrapment protection is required on automatic gate systems, and we can bring a legacy operator up to that standard when the motor and gearbox are still in workable shape. If the operator has failed repeatedly, replacement is usually the cheaper long-term answer. Call (855) 473-3106 for an exact quote; estimates are free.
Gates in Pacoima sag more because of the alluvial soil near the Pacoima Wash, which shifts with seasonal moisture changes and pushes hinge posts out of alignment. This is a real, local condition that doesn’t affect the foothill cities the same way. The fix is a deeper concrete footing and adjustable hinges that let the gate be fine-tuned as the ground moves. Call (855) 473-3106 and ask for a post and hinge inspection.
Yes, we weld hinge replacements and latch repairs on-site for most wrought-iron gates in Pacoima. We cut out the rusted sections, weld new steel, and re-hang the gate the same visit when access allows. If the gate has to be removed for fabrication, we’ll tell you before starting. Call (855) 473-3106 for a free estimate.
Yes, we repair and replace keypad entry systems, loop detectors, and remote receivers for driveway gates across Pacoima. The usual culprits are corroded wiring connections, failed loop wires in the driveway, and keypads that have been baking in the Pacoima sun for a decade. We diagnose the system as a whole rather than swapping parts at random. Call (855) 473-3106 to schedule a site visit; estimates are free.
What Happens When You Call
Call (855) 473-3106. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Tell us what brand of operator you have and what the gate is doing: sagging, grinding, stuck open, or not responding. Pete Holt leads the team, and you’ll get a straight answer on whether the gate is repairable or needs replacement, along with a written price before any work starts. In the flatlands near the Pacoima Wash, gates sit on shifting alluvial soil, so we routinely re-set hinge posts with deeper concrete footings and adjustable hinges to counter seasonal ground movement, a step rarely needed in neighboring foothill cities.
On a 1950s stucco tract home near the Pacoima Wash, we repaired a sagging chain-link driveway swing gate whose original hinge post had heaved in the alluvial soil. We pulled the post, poured a deeper footing, and installed adjustable hinges to realign the gate. The homeowner also had us replace a failed LiftMaster control board and add safety photocells to bring the operator up to UL 325 entrapment protection. The gate now swings freely and the opener runs without straining. That’s the kind of repair that repeats itself across this part of Pacoima, and it’s work we’ve done hundreds of times.
Written by Pete Holt, Owner at Gate Repair Arleta, serving Pacoima since 2018.