Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Arleta
An electric gate that won’t open or close in Arleta isn’t just inconvenient. It blocks the only vehicle access to most rear detached garages on these narrow 50-foot lots. We fix that fast. Gate Repair Arleta specializes in electric gate repair, and we know exactly which failure patterns show up on the original welded steel swing gates that line the side driveways of this neighborhood’s 1948 – 1955 tract homes. Call (855) 473-3106. We answer 24/7, and we dispatch a technician to Arleta from 7am to 7pm, Sunday through Friday.
Why Arleta Homeowners Call Gate Repair Arleta for Electric Gate Repair
Most gate companies treat an Arleta service call like any other stop on the map. We don’t. Pete Holt started this company because the post-WWII housing stock around Beachy Avenue, Osborne Street, and Canterbury Avenue creates a very specific kind of gate problem, and generic fence contractors rarely understand it. Hundreds of homes here have the same rear-garage, side-driveway layout, which means we see the same worn hinge posts and obsolete control boards week after week.
That repetition works in your favor. A technician who has repaired a dozen 1950s welded steel gates on the same block already knows what to check before the truck stops. We don’t show up to learn on your gate. We show up with the diagnostic pattern already in our heads, and usually with the right parts on board.
For electric gate repair in Arleta, our team treats this as a production-line trade, not a mystery job. The estimate is free, the price gets agreed before any work starts, and the repair gets done on the first visit whenever it’s safe to do so.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair in Arleta
Automatic gate repair in Arleta usually means one of two things: a swing gate frame from the 1950s that has sagged and thrown off the operator, or a modern opener that has failed on a frame never designed for automation. Both are common here, because so many original manual gates were retrofitted with add-on openers over the decades. A typical repair runs $180 – $340 when it’s a worn hinge or limit switch, and $450 – $900 when the repair involves re-setting a shifted hinge post or replacing a control board.
Sagging Gates and Shifted Footings
Arleta’s original welded steel swing gates hang on posts set into footings poured when Eisenhower was president. Sixty-plus years of opening cycles and the valley’s dry, shifting soil leave those posts leaning. The gate then binds at the latch side, the operator strains, and the safety sensors trip. We re-set the post, align the gate, and only then adjust the operator. A gate that is out of level will destroy a new motor in a season.
Operators Added to Original Frames
A manual gate converted to automatic with an older LiftMaster or Mighty Mule opener often has mismatched geometry. The arm mounts where a hand latch used to be. That works until the gate swells in winter rain or the steel track expands in August heat, and then the opener faults out. We correct the mounting points and, when the opener is obsolete, retrofit a unit sized for the actual gate weight rather than whatever was on sale two decades ago.
Electric Gate Motor in Arleta
An electric gate motor in Arleta works hard all summer. When daytime highs push past 100°F, the motor housing absorbs heat from the sun and the steel track expands, increasing drag. The motor’s duty cycle shortens, and older units with worn capacitors simply give out. In the rainy season, the same motor may work fine but the gate it moves swells and binds, which kills the motor’s limit logic. A motor or operator replacement in this neighborhood typically lands between $450 and $1,100, depending on whether we reuse the existing mounts and wiring.
Retrofit Decisions on Older Gates
When an original 1950s gate has a dead motor, the first question is whether the frame is worth keeping. Most of the time it is. The welded steel on these Arleta gates is heavier than anything sold today. If the hinge post is sound and the frame isn’t rusted through, we fit a new operator and the gate runs for another twenty years. If the post footing has crumbled, we say so honestly, because a new motor on a bad post is wasted money.
Legacy Brands and Obsolete Boards
Many gates here run on LiftMaster or FAAC operators installed in the 1990s and early 2000s. The control boards in those units fail unpredictably after summer heat or winter moisture, and many are no longer manufactured. We keep common replacement boards and retrofit kits in local stock for Arleta customers, and when a board is truly unavailable we replace the operator with a current Linear or DoorKing unit that matches the gate’s weight and cycle count.
Trusted Brands We Service in Arleta
We work on your brand. That means LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, because nine competing manufacturers cover nearly every system on an Arleta driveway. When a LiftMaster operator from a 2000s-era install fails on a 1950s gate frame, we know that combination cold. When a DoorKing slide operator at an apartment building on Van Nuys Boulevard acts up, we carry the right diagnostic approach. We stock common parts locally for Arleta jobs, which keeps most repairs on one visit instead of two.
Common Electric Gate Repair Problems We See in Arleta Homes
- Worn hinge posts and shifted footings. The original welded steel swing gates lean as the soil shifts, and the operator binds on a gate that no longer sits square. Re-setting the post is a same-day repair, but ignored sagging will destroy the motor.
- Obsolete control boards in legacy LiftMaster and FAAC operators. Heat and winter moisture make these boards fail on a timeline, not a schedule. We can often retrofit a current board, and when we can’t, the whole operator gets replaced for less than chasing scarce legacy parts.
- Track expansion and wood-gate swelling. Steel tracks expand when August temperatures top 100°F, and original wood gates swell when the winter rain arrives. The same Arleta gate often needs opposite adjustments in August and January.
- Operators retrofitted onto manual frames. Add-on openers installed decades ago work until the gate geometry shifts. We correct the mount, realign the gate, and match the operator to the real gate weight rather than the original guess.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Arleta, CA
Here’s what actually drives the number in Arleta. A basic repair like a limit switch, safety sensor, or remote programming runs $180 – $340. Re-setting a shifted hinge post or replacing a control board runs $450 – $900. A full operator replacement with new mounts runs $450 – $1,100, depending on gate weight and how much of the existing wiring is salvageable. The written estimate is free, we quote the exact price before any work starts, and that price doesn’t move unless you approve the change. Call (855) 473-3106 for an exact quote on your gate. We answer 24/7. Fast dispatch from 7am to 7pm.
We Also Serve Cities Near Arleta
Our electric gate repair crew covers the surrounding San Fernando Valley. We run calls to Pacoima, electric gate repair in Mission Hills, Panorama City, and North Hills East. The same gate types show up from one side of the 5 to the other, so the truck usually has the right parts before it leaves the shop.
Serving Arleta, CA – Our Local Coverage Area
We serve Arleta and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Arleta
It can usually be fixed. The steel frame expands in direct sun and the track warms past 140°F, but the more common culprit is a hinge post that has shifted over sixty years and thrown the gate out of square. We correct the sag, re-set the post if needed, and the frame keeps working. Replacement only makes sense when the steel itself is rusted through at the hinge welds. Call (855) 473-3106 for a free on-site estimate and we’ll tell you which situation you have.
If the operator was installed before the early 2000s, it may rely on force-sensing only, with no separate photo eye or contact edge. The test is simple to describe, but if there’s any doubt we check it on site. A gate that reverses by sensing pressure alone can hurt a child or a delivery driver. We treat that as a repair, not an upsell, and we recommend against enabling a close timer on any gate without working safety edges. Call (855) 473-3106 and we’ll inspect yours.
The hinge post footing. On the original welded steel swing gates, the post sits in a concrete footer poured in the 1950s, and valley soil movement plus thousands of open cycles throws it out of level. Once that happens, the gate sags, the operator binds, and the safety sensors trip. We re-set more hinge posts in Arleta than we replace motors, because the post is the root cause and the motor symptom is just louder. Call (855) 473-3106 for an exact quote.
Yes, and that configuration is common here. A gate that started life as a manual swing gate and got an add-on opener later often has wrong mounting geometry and an opener sized too small for the real gate weight. We correct the mounts, re-align the gate, and either repair the existing operator or retrofit a current one. The original frame is usually worth keeping. Call (855) 473-3106 and we’ll walk it with you for free.
Because Arleta has two opposite problem seasons. In the San Fernando Valley’s hot, dry summer, steel tracks and frames expand and bind. In the winter rain, a wood gate absorbs moisture and swells, dragging on the track or jamming against the latch post. A steel gate responds to one fix and a wood gate to another, and we set the operator’s limits for the season we’re in. Call (855) 473-3106 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Call Gate Repair Arleta for Electric Gate Repair
If your gate is dragging, binding, refusing to close, or running on an operator older than your kids, call us. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we know how each one behaves on the original tract-home gates around Arleta. The estimate is free. The price is set before we start. Call (855) 473-3106. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Pete Holt, Owner at Gate Repair Arleta, serving Arleta since 2018.