Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Arleta Homeowners
When an electric gate stops opening, starts grinding, or refuses to close all the way, it stops being an inconvenience and becomes a security problem and a daily frustration. That’s the moment Arleta homeowners call us. Gate Repair Arleta is a dedicated gate specialist team led by Pete Holt, and we’ve been repairing electric gate systems since 2018. We don’t do fences, we don’t do garage doors, and we don’t learn on your dime. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems every week. If your gate is misbehaving in Arleta this morning, we can usually have a technician at your property the same day. Call (855) 473-3106. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Opener Repair
Gate Opener Repair is the work of diagnosing and fixing the motorized operator that pulls or swings your gate open. Most Arleta homeowners only notice the opener when it fails, but the symptoms usually show up weeks earlier: slower travel, a grinding sound, or a gate that stops halfway and reverses. We service openers from Ghost Controls and Mighty Mule on the residential side, and heavier operators from DoorKing and FAAC on larger properties. The typical gate opener repair in Arleta runs between $180 and $450 depending on whether the problem is a control board, a limit switch, or a worn gear. Every repair starts with a diagnostic call, and the price is set by written estimate before we touch a single component.
Control Board Replacement
When an opener’s logic board fails, the gate may not respond to remotes, keypads, or safety sensors. We trace the fault to the board itself before recommending replacement, rather than swapping parts on a guess. The written estimate covers the board, labor, and a final test of every connected device.
Limit Switch and Travel Adjustments
A gate that stops short or over-travels usually has a bad limit switch or a drift in its travel settings. We set the open and close positions precisely so the gate seats fully against the stop without straining the motor. This also reduces wear on the chain or belt.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the full system, not just the opener: the motor, wiring, remote receivers, safety edges, and the physical gate itself. In Arleta, we see a lot of systems where the gate works fine for years and then one component drags the whole thing down. A failing capacitor, a corroded wire splice, or a misaligned safety beam can all present as a dead gate. Automatic gate repair in Arleta typically costs $200 to $600 depending on how many components are involved and whether we’re replacing a receiver, a sensor, or a motor. We diagnose the integrated system, quote the repair up front, and you approve the number before we start.
Safety Sensor and Photo Eye Repair
Automatic gates are required to stop and reverse when something crosses the path. When a photo eye or edge sensor fails, the gate may refuse to close, or worse, keep closing when it shouldn’t. We test every sensor during a repair and replace any that respond inconsistently.
Remote and Receiver Troubleshooting
When your remote works from three feet away but not from the street, it’s usually the receiver, not the battery. We check antenna placement, receiver sensitivity, and remote programming. If the receiver is fine, we help you rule out interference from other Arleta-area devices.
Electric Gate Motor
The Electric Gate Motor is the muscle of your automated gate. It’s the component that actually moves the gate leaf, whether that’s a sliding panel on a track or a swinging gate on hinges. Motors wear out. In the San Fernando Valley heat, Arleta gate motors run hot for months at a time, and that shortens the life of capacitors and windings. A motor replacement in Arleta typically runs $350 to $900 installed, depending on whether it’s a residential Mighty Mule or a commercial-grade DoorKing or Elite operator. We confirm the motor is the fault before quoting replacement. If the motor is fine and the problem is the control board or a bad wire, we don’t sell you a motor you don’t need.
Capacitor and Gear Replacement
A gate motor that hums but won’t start often has a failed start capacitor. A motor that clicks and moves a few inches may have stripped internal gears. Both are common repairs that cost a fraction of a full motor replacement, and we check them first.
Motor Mount and Chain Alignment
When a motor shifts on its mounting bolts, the chain or belt runs at an angle and accelerates wear. We realign the motor, tension the drive, and check the sprockets. A straight drive train is quieter and lasts longer.
Gate Access Control
Gate Access Control is the electronics that decide who gets in: keypads, card readers, telephone entry systems, and the occasional smartphone-based controller. When a tenant moves out of a rental property in Arleta, or a keypad code stops working, the gate itself is usually fine and the access control is the problem. We repair and program access control for residential and light commercial systems, including the telephone entry units that pair with DoorKing and Linear operators. Access control repair in Arleta typically costs $150 to $400, depending on whether we’re replacing a keypad, a reader, or a controller board. We also set up new codes and clear old ones while we’re on site.
Keypad and Card Reader Programming
A keypad that lights up but won’t open the gate usually needs reprogramming or a wiring check. We match the relay output to the operator and test every credential. If a card reader is failing, we check the power supply first, then the reader itself.
Telephone Entry System Repair
Telephone entry units rely on a phone line or cellular connection to buzz visitors through. When the call doesn’t go through, the problem can be the unit, the power supply, or the line itself. We isolate the fault and get the system talking to the gate operator again.
Commercial Gate Operator
A Commercial Gate Operator is a heavy-duty motor and control system built for gates that cycle hundreds of times a day at apartment buildings, business parks, and storage facilities. These operators are not residential openers with a bigger motor. They’re engineered for continuous duty, and they need a technician who knows the difference. We service commercial operators from FAAC, BFT, DoorKing, and Viking. A typical commercial gate operator repair in Arleta runs $400 to $1,200, with the higher end reserved for full operator replacements on high-cycle systems. We also work with property managers to schedule repairs around traffic flow, so a broken gate doesn’t shut the property down.
High-Cycle Component Replacement
Commercial operators wear out on a schedule. Limit switches, contactors, and drive belts are the most common failures on high-cycle gates. We replace worn components before they cascade into a motor failure, and we quote the work in plain language so a property manager can budget it.
Operator Retrofit and Upgrade
When an old operator is beyond repair, we can retrofit a new FAAC or BFT unit onto the existing gate and mounting pad. That’s often half the cost of a full gate replacement. We match the operator to the gate’s weight, width, and daily cycle count.
Brands We Service
Ghost Controls makes residential swing and sliding gate openers that are common on Arleta single-family homes. We know their control boards, their remote pairing process, and the ways their limit switches drift over time. When a Ghost Controls gate fails, we usually have it running again in one visit.
DoorKing and Elite both build operators that end up on apartment and commercial properties. DoorKing telephone entry systems are a frequent source of service calls, and Elite operators are known for their heavy-duty slide gate motors. We know where each brand wears out and what to check first. Mighty Mule openers are popular on smaller residential gates, and we service them regularly. Whether you have a Mighty Mule on a driveway gate or a DoorKing on a commercial entrance, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate stops halfway and reverses. This is often a safety sensor issue, but it can also be a failing motor or a binding track. A gate that won’t complete its travel is a gate that’s burning out its own motor every time it tries.
- The gate moves slower than it used to. Slower travel means extra resistance somewhere: a dry roller, a sagging hinge, or a motor that’s losing power. Left alone, that resistance becomes a full failure, usually at the worst possible time.
- The opener hums but the gate doesn’t move. That hum is the motor trying to start and failing. It usually means a bad capacitor or stripped gears. Continuing to press the remote just damages the motor further.
- The gate slams shut or drifts open. A gate that closes too fast has lost its hydraulic or mechanical resistance. That’s a safety hazard for anyone walking near it. A gate that drifts open is a security hole.
- Remotes and keypads work intermittently. Intermittent operation is rarely a battery problem. It’s usually a failing receiver, a loose wire, or a control board on its way out. The sooner we catch it, the cheaper the fix.
Our Process, Step by Step
- 1
You call and describe the symptom. When you call (855) 473-3106, a real person answers. We listen to what the gate is doing, ask about your brand and setup, and schedule a dispatch window. We answer 24/7.
- 2
A technician arrives and tests the system. We don’t guess. We check the power supply, the control board, the motor, the limits, the sensors, and the physical gate. We use a multimeter to trace voltage issues and isolate the fault.
- 3
You get a written estimate. Before any repair work begins, you know the exact price. No surprises on the invoice. If the repair doesn’t make economic sense, we’ll tell you that too and lay out your alternatives.
- 4
We complete the repair and test everything. We replace the failed component, then run the gate through multiple cycles. We check the safety reversal, the remote range, and the stop positions. The gate doesn’t get called done until it runs correctly.
- 5
We walk you through what we did. You’ll know what broke, why it broke, and what we replaced. If there’s a maintenance item worth watching, we’ll tell you about it in plain English. No jargon, no upsell.
How Much Does Electric Gate Repair Cost in Arleta?
Electric gate repair in Arleta typically costs between $180 and $1,200 depending on what’s wrong. Here’s how common scenarios break down:
- Gate opener repair: $180 to $450 for limit switches, capacitors, remotes, or control board diagnosis and replacement.
- Automatic gate repair: $200 to $600 when the job involves multiple components like sensors, wiring repairs, and receiver troubleshooting.
- Electric gate motor replacement: $350 to $900 installed, depending on the motor size and brand.
- Gate access control repair: $150 to $400 for keypads, card readers, and programming.
- Commercial gate operator repair: $400 to $1,200 for high-cycle operators, retrofit work, and heavy-duty component replacement.
What changes the price? The brand, the age of the system, the weight of the gate, and whether the failed part is an off-the-shelf capacitor or a proprietary control board. Arleta’s summer heat tends to age capacitors and wiring faster than milder climates, but that’s just one factor. The best way to avoid overpaying is to get a flat, written estimate before work starts. That’s exactly how we do it. The estimate is free, and the number we quote is the number you pay.
Our Service Area Near Arleta
We’re based in Arleta and dispatch technicians throughout the surrounding San Fernando Valley. Most jobs in Arleta, Panorama City, Mission Hills, Sun Valley, and North Hills East are reached within an hour or less. We also serve Pacoima, Granada Hills South, North Hills West, and the wider valley areas. If you’re in electric gate repair territory in Pacoima, we’re already nearby. Our electric gate repair coverage also extends into Woodland Hills. For a deeper look at what our electric gate repair service includes, we’ve spelled out every step. And if you’re just starting to research who to call, Gate Repair Arleta is a focused gate specialist, not a general contractor.
Serving Arleta, CA – Our Local Coverage Area
We serve Arleta and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Arleta
Electric gate repair is the diagnosis and repair of motorized gate systems: the motor, control board, wiring, remote receivers, safety sensors, and the physical gate hardware. It covers both residential driveway gates and commercial entrance gates. We troubleshoot the whole system rather than swapping parts at random, which means the actual problem gets fixed the first time.
Most residential opener repairs are completed in one visit, typically one to three hours on site. A motor replacement or a commercial operator repair may take longer, especially if parts need to be ordered for a less common brand. We’ll give you a realistic time estimate when we quote the work.
Most repairs in Arleta land between $180 and $1,200. Opener repairs are usually $180 to $450, motor replacements run $350 to $900, and commercial operator work starts around $400. The written estimate tells you the exact number before we start, and the estimate is free. Call (855) 473-3106 for a same-day estimate.
Yes. We work on DoorKing, Mighty Mule, Ghost Controls, Elite, LiftMaster, FAAC, BFT, Linear, and Viking systems. DoorKing and Mighty Mule are two of the most common brands we see in Arleta, and our technicians recognize them on sight. We don’t need to learn your system while you’re paying for the hour.
Yes. Same-day service is available for most Arleta addresses. We answer the phone 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. A call outside dispatch hours is booked into the next opening.
We stand behind the components we install and the labor we perform. The exact warranty term depends on the part and the manufacturer. We’ll spell out the warranty coverage on your written estimate before any work begins, so there are no questions later.
Clear the driveway or gate area so the gate has room to cycle during testing. Have your remote or keypad code available so we can test every access point. If the gate is on a shared property, let us know who to check in with. We handle the rest from there.
Schedule Your Electric Gate Repair Service in Arleta Today
If your electric gate is acting up in Arleta, don’t wait for a total failure. Call (855) 473-3106 and describe what’s happening. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. The estimate is free, the price is set before work starts, and your gate gets fixed by a team that knows your brand.
Written by Pete Holt, Owner at Gate Repair Arleta, serving Arleta since 2018.