Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Granada Hills South, CA
We repair Ghost Controls gate openers throughout Granada Hills South, and the work here is different from most parts of the Valley. Your operator is likely mounted on a post that shifted years after installation, because this neighborhood’s 1950s and 60s ranch homes sit on deep lots with original block-and-brick walls that move. We’re an independent Ghost Controls service provider, not factory-affiliated, and we diagnose the post, the arm, the board, and the battery as one integrated system. Call (855) 473-3106 for a free estimate.
Why Granada Hills South Residents Choose Us for Ghost Controls Service
Our technicians recognize Ghost Controls equipment on sight. We work on the solar-charged and low-voltage swing-gate operators that populate driveways south of Rialto every week, so the battery-first architecture, control-board behavior, and accessory wiring aren’t mysteries to us. We service Ghost Controls openers alongside LiftMaster, Mighty Mule, DoorKing, and six other major brands, which means a troubleshooting decision comes from actual system knowledge rather than loyalty to one product line.
Pete Holt started Gate Repair Arleta in 2018 after more than a decade in the trade, working on gate operators, control boards, and structural repairs across the northeast San Fernando Valley. He grew up near Arleta Park and trained in electrical and mechanical systems at Los Angeles Valley College. His approach on every Ghost Controls job in Granada Hills South is the same: figure out what actually failed, fix that, and leave the parts that are still doing their job alone.
If the gate isn’t moving the way it should, there’s a reason, and it’s usually not the reason the last guy guessed.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Granada Hills South
- Heat-stressed control boards and battery terminals. Granada Hills South summers routinely push past 100°F, and solar-charged Ghost Controls units absorb that heat season after season. Corroded or heat-cracked board connections cause intermittent cycles, dead keypads, and operators that work in the morning but quit by afternoon. We test the board and battery separately before recommending either.
- Arm brackets and post-plates pulling loose from aging posts. Many Ghost Controls operators here were anchored to the original 1950s or 60s wood or block posts that have since dried, split, or shifted. The operator itself may be fine, while the mounting point fails. We re-plumb the post, re-level the arm, and re-anchor the bracket so the motor isn’t fighting the geometry.
- Limit and soft-start settings drifting as wood gates swell and warp. Winter rain swells the wood on custom driveway gates, and summer heat warps it back. A Ghost Controls operator that strains mid-travel or reverses unexpectedly often just needs its limits reset to match the gate’s current dimensions, not a new motor.
- Accessory wiring faults on legacy installs. Keypads, photo-eye beams, and receiver wiring on older Ghost Controls installations in Granada Hills South were often run through conduit that was never re-sealed. The sandy soil wicks moisture in, and winter rain finishes the job. We trace the low-voltage run, find the failed connection or corroded splice, and repair it rather than replacing accessories wholesale.
- Battery backup that no longer holds a charge. Ghost Controls solar-charged systems depend on healthy batteries. In Granada Hills South’s heat, batteries age faster than the control boards do. When an opener only runs on direct sunlight or dies hours after a full charge cycle, we test the battery under load before recommending replacement.
Ghost Controls Service in Granada Hills South: What Local Conditions Mean for Your Equipment
The ranch homes south of Rinaldi present a specific problem for Ghost Controls owners. These properties sit on deep lots, and the gates are usually set well back from the street on block-and-brick walls that were poured decades before the operator was ever installed. Those walls have shifted. So when a Ghost Controls opener starts binding, stalling, or reversing mid-travel, our first job is often re-plumbing the post and re-leveling the arm, not touching the motor at all. We’ve arrived at calls where the control board and battery tested perfectly fine, and the entire failure came down to a post that had moved half an inch after a Santa Ana wind event. Granada Hills South’s combination of original masonry, mature street trees, and deep-lot gate placement means the mounting point fails before the operator does. We start there.
Ghost Controls Models & Products We Service in Granada Hills South
We service the full practical range of Ghost Controls equipment found in Granada Hills South: the Heavy-Duty Series dual swing opener kits, Standard Series single swing kits, and the solar-charged low-voltage DC operators paired with AX-series accessories. That includes keypads, photo-eye beams, and remote/receiver kits. When a Ghost Controls control board, arm, or battery needs replacement and the unit is current, we use OEM parts. When OEM is back-ordered or the repair genuinely doesn’t justify factory pricing, we install quality aftermarket batteries, photo-eyes, keypads, and remotes that fit the system correctly. We’re an independent shop, not a Ghost Controls dealer, so the recommendation is based on what actually fixes your gate.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Granada Hills South
Repair pricing on Ghost Controls equipment in this area varies by what failed. A control board replacement, a battery swap, or a limit- and soft-start reset are all different scopes. A post that needs re-plumbing and an arm bracket that needs re-anchoring adds structural labor. The written estimate sets the final price, and it’s quoted and agreed before any work starts. A free on-site estimate tells you exactly what failed, what it costs to fix, and whether repairing or replacing the operator makes more sense for your Granada Hills South property. Call (855) 473-3106 to schedule one.
| Service | Typical Cost Range |
|---|---|
| Ghost Controls diagnostic visit & limit reset | $95 – $180 |
| Control board replacement | $280 – $520 |
| Battery replacement (solar-charged units) | $110 – $240 |
| Arm bracket re-anchoring & post re-leveling | $220 – $450 |
| Accessory wiring repair (keypad, photo-eye, receiver) | $130 – $310 |
These are estimates, not quotes. Your written estimate sets the exact price before work begins.
Serving Granada Hills South, CA – Our Local Coverage Area
We serve Granada Hills South and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Granada Hills South
It’s usually the battery, specifically a solar-charged Ghost Controls battery that has aged under Granada Hills South’s summer heat and no longer holds a charge through the day’s power draw. The board can also fail intermittently when heat expands a cracked solder joint, so we test both under load before calling it. Call (855) 473-3106 for a diagnostic visit that tells you which one failed.
Yes. We re-plumb the post and re-level the arm rather than forcing the operator to work against a bad angle. On Granada Hills South’s original block-and-brick walls, the masonry has usually shifted long after installation, and the fix is structural, not electronic. Call us for a free estimate on re-anchoring your Ghost Controls operator.
Not necessarily. The failed component is usually the low-voltage wiring run, not the keypad or photo-eye itself. Sandy soil around Granada Hills South wicks moisture into conduits, and winter rain finds the weak splice. We repair the wiring and only replace accessories that actually test bad. Call (855) 473-3106 and describe what stopped working.
The solar panel keeps the battery topped up, but it doesn’t protect the control board or battery terminals from sustained 100°F-plus temperatures. Heat stress is the leading cause of Ghost Controls board failure in the San Fernando Valley. We can add terminal protection and reposition components to reduce direct heat exposure where the installation allows.
If the operator’s board, arm, and battery are still sound, re-anchoring to a new post and resetting the limits and soft-start usually beats replacing the unit. A warped wood gate in Granada Hills South doesn’t automatically mean a dead operator. But when a heat-cracked board and a rotted post stack up, we say so plainly instead of selling you a repair that won’t last. Call (855) 473-3106 and we’ll tell you which side of that line your gate falls on.
Service Areas Near Granada Hills South
Our team covers Granada Hills South and the surrounding area, including Granada Hills, Mission Hills, Arleta, Pacoima, and Woodland Hills. If you’re just outside these boundaries, call (855) 473-3106 and we’ll confirm coverage.
Book Your Ghost Controls Service in Granada Hills South Today
We offer same-day service on most Ghost Controls repair calls in Granada Hills South. The estimate is free, the price is agreed before work starts, and the technician who arrives knows your opener type before they ring the bell. Call (855) 473-3106. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Pete Holt, Owner at Gate Repair Arleta, serving Granada Hills South since 2018.