Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Arleta?
A gate motor and opener replacement in Arleta typically runs $850 to $2,400 for a residential swing or slide gate, including the operator, control board setup, and safety sensors. Heavy-duty commercial operators land higher, usually $1,600 to $4,500, depending on gate weight and duty cycle. Repairing an existing motor or opener instead of replacing it generally costs $180 to $650.
We’re an electric gate specialist, not a general fence company. That matters on this kind of job, because the number in your estimate depends almost entirely on which system is already bolted to your gate. Mighty Mule and Ghost Controls openers price and behave very differently from a FAAC or DoorKing operator, and we work on all of them. For a broader look at the work we do, see gate repair Arleta.
Gate Motor & Opener Cost Breakdown (2026)
Here’s how the line items break out for the Arleta market this year. Ranges assume a standard residential driveway gate unless noted. Final pricing is set per job by the written estimate after we look at your gate.
| Line Item | Typical Range | Notes |
|---|---|---|
| Motor / operator replacement (residential swing) | $850 – $2,400 | Includes opener unit, mounting, and control board setup |
| Motor / operator replacement (residential slide) | $1,100 – $2,800 | Higher on heavier panels and longer tracks |
| Commercial-duty operator (FAAC, BFT, DoorKing) | $1,600 – $4,500 | Duty cycle and gate weight drive the number |
| Control board repair or replacement | $220 – $650 | Brand-specific diagnosis required |
| Motor repair (brushes, capacitor, gearing) | $180 – $520 | Only when the unit is sound enough to be worth it |
| Safety sensor / photo-eye replacement | $120 – $320 | Required for a code-compliant automatic gate |
| Wiring and electrical connection work | $200 – $900 | Depends on run length and conduit condition |
| Battery backup or solar add-on (Mighty Mule, Ghost Controls) | $280 – $750 | Common on properties without nearby power |
What pushes the number up: a heavier gate panel, a longer wire run from the power source, and a swing gate that needs an arm operator rather than a slide operator. Commercial operators cost more because they handle more weight and run more cycles per day. What pulls it down: a gate in good mechanical shape, existing wiring you can reuse, and an opener that fails on a part we can repair rather than a whole unit that has to be replaced.
If your gate also has a structural or mechanical problem beyond the motor, that’s handled on the repair side rather than the opener price. We cover it on our electric gate repair in Arleta page.
What Affects Gate Motor & Opener Pricing in Arleta
Pricing isn’t a flat rate. These are the variables that move it in Arleta specifically:
- Your existing brand. Mighty Mule and Ghost Controls residential openers are lighter and less expensive to replace. FAAC, BFT, DoorKing, and other commercial operators carry higher parts costs. Knowing the brand on sight is why we can quote accurately rather than guessing.
- Gate weight and type. A lightweight ornamental swing gate and a solid steel slide gate need different operators. Heavier panels need a heavier-duty motor, which costs more up front but lasts longer.
- Power situation. If power already runs to the gate, wiring work is minimal. If the gate sits far from the house, the wire run and conduit add to the estimate. Solar and battery options are common on Arleta properties where running power is a hassle.
- Safety compliance. Automatic gates need working photo-eyes and entrapment protection. If those are missing or failing, they get priced into the job because an automatic gate without them is a genuine hazard.
- Brand-specific parts. A control board for one manufacturer isn’t interchangeable with another. The nine brands we work on – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – mean we source the right part for your system instead of swapping in whatever fits.
- Duty cycle for commercial properties. A property manager running a gate dozens of times a day needs an operator rated for that. Commercial-duty replacement costs more but avoids repeat failures.
When to Repair vs. Replace a Gate Opener
A control board repair at $220 to $650 is usually the right call when the motor itself is healthy. A full replacement at $850 to $2,400 makes more sense when the motor is worn, the unit is old enough that parts are hard to source, or the gate weight has outgrown the operator.
Two things tip the decision. First, how the motor sounds and moves under load – a motor that labors or stalls is telling you it’s tired. Second, whether the unit is still supported. Older openers from any brand reach a point where the control board or gears are no longer worth sourcing. When that happens, replacement is the honest answer. We’ll tell you which one applies to your system, and why, rather than defaulting to a new install.
How to Save on Gate Motor & Opener in Arleta
You don’t need to chase a discount to spend less. A few practical moves help:
- Get the diagnosis right the first time. A brand-agnostic specialist recognizes your operator and tests the actual fault. Trial-and-error repairs are how people end up paying twice.
- Repair the board before replacing the motor. If the motor is sound, a board repair keeps you well under a thousand dollars instead of jumping to a full unit.
- Reuse good wiring. If the wiring to your gate is intact, say so when you call. It’s one less line item.
- Match the operator to the gate. An undersized motor on a heavy gate fails early and often. Paying slightly more for the right operator once is cheaper than replacing the wrong one twice.
- Bring the brand name. If you know your opener make – LiftMaster, Linear, Viking, Elite, or any of the nine we work on – tell us when you call. It speeds up the estimate.
Estimates are free, and we come out, look at the gate, and give you a written price. Call (855) 473-3106 to set it up. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Same-Day Repair and What to Expect
Automated gate problems tend to announce themselves clearly – the gate stops mid-travel, reverses for no reason, buzzes without moving, or the remote stops working. When those show up, same-day repair is often possible. Fast dispatch runs from 7am to 7pm, Sunday through Friday. We answer 24/7, so if you call outside those hours, we book you into the next opening.
What a typical opener job involves: we test the operator, the control board, and the wiring as one system rather than swapping a part and hoping. Then we give you the written estimate, and the price you see is the price we set. If your brand is one of the nine we cover, we already know how it’s supposed to behave.
A safety note that matters with any automatic gate: the operator’s power and wiring are genuinely dangerous to work on, and a heavy gate panel that moves without working safety sensors can crush. Leave the electrical connection to a trained gate technician. Check the operator’s entrapment protection is functioning, keep the area clear, and don’t defeat the safety devices to force a gate to close.
FAQs – Gate Motor & Opener Cost
How much does a gate opener cost to replace in Arleta?
Replacing a residential gate opener in Arleta typically costs $850 to $2,400 for a swing or slide gate, and $1,600 to $4,500 for commercial-duty operators. Call (855) 473-3106 for an exact quote – estimates are free.
Is it cheaper to repair or replace my gate motor?
Repair is cheaper when the motor is healthy – board and motor repairs run $180 to $650, versus $850 or more to replace the unit. Once the opener is worn or parts are hard to source, replacement is the better value. We’ll tell you which applies after we look. Call (855) 473-3106.
What brands of gate opener do you work on?
We work on nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That spans lightweight residential openers through commercial-duty operators, so we recognize your system rather than learning it on the job. Call (855) 473-3106.
Can you install a new gate opener the same day?
Many opener replacements can be done the same day once the unit and parts are on hand. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we answer 24/7. Call (855) 473-3106 to check availability for your Arleta property.
Do I need a permit to install a gate operator in Arleta?
Permit rules vary, so ask the City of Los Angeles building department about your specific install before work begins. We can tell you what the installation involves electrically and mechanically. Call (855) 473-3106 for a free estimate.
Why a Gate Specialist Prices This Differently
General fence contractors and garage-door companies treat gates as a side job. We don’t. Gate repair, electric gate repair, and gate installation are the whole of what we do, which means the same team that installs a new operator also repairs and services it later. No handoffs, no gaps between the installer and the repair tech. We’ve been serving the Arleta market since 2018, and the brand range we carry – from Mighty Mule residential openers up to FAAC, BFT, and DoorKing commercial operators – is a reflection of the properties we see here.
Contact Gate Repair Arleta
If your gate motor or opener is failing, aging, or due for an upgrade, the fastest path to a real number is a free estimate. Call (855) 473-3106. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One of our technicians will look at your system, confirm the brand, and give you a written price. No service-call fee, no pressure, just a clear number and the repair done right the first time.
Pricing reflects the Arleta market as of 2026. Gate Repair Arleta offers free estimates – call (855) 473-3106. Written by the team at Gate Repair Arleta, serving Arleta since 2018.
What Our Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Hector Herrera"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Stephanie Gallagher"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Xavier Freeman